Kirklees 2_edited.jpg

Bannerflex
Airow Systems

 

BannerFlex Standard D3 Airow

The Standard BannerFlex D3 is designed for use on larger diameter lamp columns and/or where a larger banner is preferred. 

The revolutionary BannerFlex D3 AIROW utilizes a specially shaped CNC-tapered fiberglass arm to achieve a dramatic increase in wind-spillage. Our extensive research and testing has resulted in the development of a system which dramatically reduces the stresses transferred to the lamp column, a crucial factor that all Engineers regard as a priority when attaching banners to lighting stock.  

Key to the BannerFlex systems ability to withstand high winds is our unique and patented ‘cantilever’ arm and casting design, which holds the banner under constant tension.  When the wind blows, the force is immediately transferred from the taught banner to the fibreglass arms, which then flex and help dissipate the energy.  This all important wind spill factor is crucial in protecting the banner from excessive wear and greatly reduces the forces exerted onto the lamp column.

The system comprises of 2 tempered cast aluminium brackets and 2 UV treated fibreglass arms.   The universal bracket allows the BannerFlex system to be mounted on almost any type of pole, regardless of shape or surface, using stainless steel geared straps, traditional banding or bolts.  The arms slide into the brackets and are held in place by stainless steel set screws; a hitch pin offers an added safety feature.  The quality materials eliminate corrosion, discolouration and peeling of paint.  The Airow system can be used to accommodate one or two banners per pole.

Key Features:

  • Durable Almag alloy bracket with 4 diametric screws and hitch pin to hold banner arm securely in place.

  • UV treated fibreglass banner arms (CNC tapered): removable and adjustable, flex under wind loading allowing air to spill off the outside of the banner thus reducing stress on the banner and lamp column.

  • Unique canted banner arm design: Top arm is canted up, bottom arm is canted down, and when banner is installed the canted arms put the banner under tension to transfer wind force to the fibreglass.  Produces a taut, tight and trim banner appearance with no ‘flopping’ or ‘sagging’

  • Tested to withstand up to 120mph wind force.

  • Banner arms can be supplied in any length to suit banner size required

  • Universal bracket for installation onto round/square/octagonal/fluted /tapered lamp standards

  • Integral cast loop for anchoring banner with nylon-ties

  • Can accommodate one or two banners per pole.

  • Engineered for durability with no moving or mechanical parts to wear-out

  • Bannerflex Standard D3 is ideally suited to pole diameters of 120mm and over and/or to accommodate a maximum banner size of 750mm x 3000mm

Banner fabrication exactly the same as for our BannerFlex Euro Chieftain system.

 
 

BannerFlex Metro Airow

The BannerFlex Metro was specifically designed in response to requests for a smaller but adjustable system designed for use on all small to mid-sized diameter lamp columns.  The system boasts all of the features of the Standard BannerFlex D3 but in a more compact form.

Key Features:

  • Attractive, streamlined design with integrated banding ports

  • Weather resistant aluminium alloy bracket with 4 diametric screws and hitch pin to hold banner arm securely in place

  • UV treated fibreglass banner arms (CNC tapered): removable and adjustable, flex under wind loading allowing air to spill off the outside of the banner thus reducing stress on the banner and lamp column

  • Unique canted banner arm design: Top arm is canted up, bottom arm is canted down, and when banner is installed the canted arms put the banner under tension to transfer wind force to the fibreglass.  Produces a taut, tight and trim banner appearance with no ‘flopping’ or ‘sagging’

  • Tested to withstand up to 120mph wind force.

  • Banner arms can be supplied in any length to suit banner size required

  • Universal bracket for installation onto round/square/octagonal/fluted/tapered lamp standards

  • Integral cast loop for anchoring banner with nylon-ties

  • Can accommodate one or two banners per pole

  • Engineered for durability with no moving or mechanical parts to wear-out

  • Bannerflex Metro is ideally suited to pole diameters of 76mm and over and/or to accommodate a maximum banner size of 750mm x 2000mm

Banner fabrication exactly the same as for our BannerFlex Euro Chieftain system.